News in the world of Bender

By purchasing from an authorized Bender distributor, you are guaranteed that your purchase will be protected by the manufacturer's warranty and that...

The Bender Group is excited to announce that Heinz Nowicki has joined the company as its new Chief Sales Officer (CSO).

The new CC613 charge controller generation with its extended range of functions provide significantly more economic efficiency.

The Bender GmbH & Co. KG has taken over the development center TechniSat Dresden with effect from February 28, 2020.

In order to react appropriately to the current dynamic situation regarding the spread of the corona virus, Bender has intensified its emergency...

The requirements placed on industrial systems and installations in terms of high availability are constantly increasing. This means that it is also...

Smart sensors – integrable, multi-channel, flexible and retrofittable

A team from the EMEA region and representatives from Al Sanabel Technologies LLC will be located in Hall 2.

Every year, the Chamber of Industry and Commerce (CIC) of Giessen-Friedberg awards the title of "Company of the Year" to successful companies in the...

Bender will introduce a new future-proof glass operating theatre control panel at Arab Health 2020.

The web-based software solution POWERSCOUT® from Bender offers new possibilities to the customers in the area of proactive maintenance.

On 5 November, the time had come: The winners of the 2019 Hesse Champion awards were selected during a festive gala as part of the Hessian...

Bender is delighted to be honoured as a “finalist” in the “eMove360° Award 2019” competition.

An electric bike developed by Bath University competing in the 2019 Isle of Man TT ‘Zero’ race employed Bender insulation monitoring technology.

The German Chancellor Angela Merkel has meanwhile finished her twelfth visit to China. Bender CEO Markus Schyboll was part of the accompanying...

Markus Schyboll, Chief Executive Officer (CEO) at Bender GmbH & Co. KG, presently is on a three- day trip to China with the German Chancellor Angela...

Trusting in reliable power grids from the North Pole to the South Pole

This week the first charging workshop took place at the Bender Headquarter.

Although Silverstone is over, the race continues in Hockenheim. The next Grand Prix is set to start on August 5 and go until August 11. 118 Teams have...

With the support of the Canadian government, three companies were able to install 34 fast charging stations along a 3,000 Kilometer stretch of the...

The Formula Student is an international competition where students’ planning and technical abilities are tested by building their own race cars and...

Markus Schyboll, CEO of Bender GmbH & Co. KG, is currently accompanying this year’s delegation to North America with representatives from the Hessian...

Bender China reached next step for growing the business in the CN market and giving their customers and partners better support by opening a new...

It has been brought to our attention that there have been several recent attempts to impersonate Bender Asia Pacific Co., Ltd. over email.

The highly anticipated TechDay event was recently held under the motto “conneCted” at Bender. It was an exciting and successful day full of rich...

Solutions compliant with German calibration law are to provide clarity when charging electric vehicles and ensure kWh-accurate billing.

With its intelligent CC612 charge controller, Bender provides the basis for an AC charging station or wallbox that not only stands out for economic...

Unearthed power supply and Insulation monitoring ensure electrical safety

The topic of "autonomous driving" has been a reality in Formula Student since 2017, when this category was first introduced...

Bender Group employees at the Grünberg site surprised their senior director, Dietrich Christian Bender, with a birthday serenade today to mark his...

Extension of the device series for DC charging stations

Bender India received the prestigious ‘Economic Times Best Brands 2019‘ award in Mumbai on 29th March 2019.

NEW! – LINETRAXX® SensorPRO residual current monitors

Mobile generators are indispensable aids when power needs to be supplied to equipment that has no direct access to a permanent installation.

Bender supports Formula Student teams with insulation monitoring devices again this year

We have just completed a new films series under the heading “easily explained” – this time three short clips deal with high resistance grounded (HRG)...

Unearthed power supply and insulation monitoring ensure electrical safety

The security of the EPS data centre container, the space-saving solution for data centres, is guaranteed thanks to Bender technology.

The conference “Reliable power supply for operating theatres and intensive care areas” is scheduled for the 13th and 14th February 2019 at TÜV Süd.

Electrical safety solutions specialist Bender has launched the new isoHR685W-D-I-B for subsea cable insulation monitoring.

ISOMETER® iso685-D-P insulation monitoring device with EDS44x insulation fault locator and IOM441 input/output module

The new COMTRAXX® CP9xx alarm indicator and operator panel

Electromobility is on the rise, because in the cities of tomorrow it will be predominantly electric cars that will be used to reduce the pollution...

As a manufacturer of insulation monitoring devices for unearthed DC drive systems in electric vehicles, Bender is now expanding its e-mobility...

Bender has specially developed the new isoCHA425 insulation monitoring device for monitoring the entire charging circuit in DC charging stations....

This week the annual Bender Group Meeting was held in Grünberg. Since we as Bender want to make a difference not only on a technological, but also on...

Certainly well trained - Bender has strengthened its team with eleven new trainees, three Bachelor students and four one-year interns in Grünberg this...

Energy data, limit value monitoring and power quality

We have just completed our new film series "easily explained" on the ungrounded system, the IT-system. Each series consists of a number of short films...

From more than 8,000 medium-sized businesses, Yourfirm.de, Germany’s leading job forum, has selected 1,000 “top employers in medium-sized businesses...

Safe and reliable monitoring of energy storage devices in low-voltage distribution systems as well as in large battery storage devices thanks to...

In conjunction with the CD440 coupling device, the new VMD461 combines reliable operation with high flexibility and simple configuration for high...

We are proud to announce the release of our most advanced Neutral Grounding Resistor (NGR) Monitor, the NGRM700.

The safe and reliable charging of electric vehicles is also directly linked to electrical safety in the building installation and the charging...

Electrical safety starts in the electrical installation with the compact AC/DC sensitive RCMB104 residual current monitoring module

The safe and reliable charging of electric vehicles is also directly related to electrical safety in the building installation and the charging...

As the number of electric vehicles on the roads continues to grow, so does the infrastructure required to ensure that finding a charging station or...

The new ISOMETER® isoHV525 insulation monitoring device from Bender can be used to monitor the insulation resistance of unearthed AC, AC/DC and DC...

Mobile generators are indispensable aids when power needs to be supplied to equipment that has no direct access to a permanent installation.

Effective 01 April 2017 Markus Schyboll (46) has succeeded Dr. Dirk Pieler as the new CEO of the Bender Group.

Bender UK shows the latest safety technology at the new site in addition to an impressive new facility

Bender UK Operations Manager Gareth Brunton will be new Managing Director.

Managing Director of Bender UK Steve Mason has been chosen to head up Bender Americas, the Bender Group’s US business division, and takes up his new...

On the occasion of this year's Hannover trade fair, Bender GmbH & Co. KG from Grünberg will present itself as a partner of the HA Hessen Agentur.

On 05 November 2015, the new subsidiary of the Bender Group was opened in China.

Cooperation in development, manufacturing and sales of charging infrastructure products

On 10 June 2015, MONITORING EXPO 2015, the first specialist trade fair for IT monitoring, took place in Mainz.

Reliability of supply is a central task in electrical energy supply.

Two new sales engineers are joining the Bender Italia S.r.l. team with immediate effect.

Bender is reinforcing its presence in South America by opening an official branch in the Chilean capital of Santiago de Chile on 01 July 2015.

The ISOMETER® iso1685DP is a userfriendly device used to monitor the insulation resistance of extensive systems designed as IT systems, and is...

The new generation for monitoring modern loads

The web-based software solution POWERSCOUT® by Bender offers new possibilities to the customers in the area of proactive maintenance.

With the new insulation fault location system EDS440 insulation fault location will be even more efficient and safer

As a manufacturer of insulation monitoring devices for unearthed DC drive systems in electric vehicles, Bender is now expanding its e-mobility...

Bender Service: Safe ‒ at short notice ‒ from anywhere and anytime

With the new variants of insulation monitoring device iso685 Bender is setting standards again

Special requirements, demand reliable measurement technology

The ISOMETER® iso165C monitors the insulation resistance between the active HV components of an electrical drive system (Un = DC 0 V…600 V) and the...

The safe and reliable charging of electric vehicles is also directly related to electrical safety in the building installation and the charging...

Network and system protection for Europe

The LINETRAX® VMD460-NA provides external network and system (NS) protection...

The voltage relays VMD258 of Bender monitor three-phase AC systems for undervoltage and overvoltage (window function).

Insulation monitoring for unearthed IT AC-, AC/DC and DC systems for railway applications up to AC/DC 400 V

With new and improved functions

The COMTRAXX® COM462RTU is an enhanced successor product to the protocol converter FTC470XMB

DC charging points in electric mobility are configured as unearthed power supply systems (IT systems). The ISOMETER® in the compact device isoEV425...

In the category „EMPRESA DE TECNOLOGIA EM SAÚDE“

Bender GmbH & Co. KG in Grünberg received an award for its new portable insulation fault locator EDS195P.

Bender receives DEKRA Award 2012 in “Safety” category

Bender was awarded a prize at the international level at this year's ELECRAMA 2012.

Already in 2004, Bender was delighted to receive the special Job Motor Award.

Bender receives another award for its modular insulation monitoring device iso-F1